Waking up to discover you have no hot water is not a good situation to be in, but finding out that your water heater is shot can be even worse. If you need a new hot water heater, you will have to choose one quickly so you can get your hot water back on in your home. The problem is choosing the right water heater. There are many types and options available with water heaters, and here are some of the factors you should consider when getting one.
Hot water heaters come in various sizes, and these sizes are stated by the gallon. To choose the right water heater, you will need to factor the size into your decision, and you may want to consider the current size you have. If you have a 30-gallon system and find that you run out of hot water often, you might want to select a water heater that holds 40 or 50 gallons instead. This would give you extra hot water, and this may help you avoid running out in the future.
If you have a really large home or family, you may even want a larger one than this, or you might want to put two in. Comparing your current water heater to how well your hot water works in your home is a great place to start with when making this decision.
The recovery speed of a water heater is another factor to consider, and this is often listed in terms of a first-hour rating. A first-hour rating is something you will find on most water heaters today, and it is a great number to compare when looking at your options.
The first-hour rating on a water heater tells you how quickly the system can keep up with heating water while you use it. You may see that a system has a 34-gallon first-hour rating, and this means that the system would have the ability to produce 34 gallons of hot water in one hour.
The second rating to look at is often called the recovery rate, and this rate refers to how long the system takes to completely refill itself with hot water from an empty state. Both of these ratings are very important if you use a lot of hot water in your home and never want to run out of it.
It's also important to consider the type of energy you will be using to heat your water, and you may be limited with this option. If your home does not have any gas run to it, your only option will be an electric water heater. If your home has gas, you could choose a gas hot water heater.
Gas that is used in homes is typically natural gas or propane, and natural gas is usually more cost-effective than propane; however, you generally do not have an option. If natural gas is available, it will be used in the home. If it is not available, the home is likely to have propane.
If you have gas run to your home, you could choose either a gas-powered hot water heater or an electric one. In most case, gas hot water heaters cost a little bit more to purchase; however, gas water heaters are usually more energy efficient compared to electric ones.
Choosing the right hot water heater can be tricky, but you do not have to make this decision alone. If you are not sure how to choose the right one and need help installing it, contact a plumber in your city today.