In general, you can expect kitchen faucets and sinks to have a life expectancy of approximately 15 years before they start breaking down. Before they start to malfunction completely, the faucets will start to show signs of wear and deterioration through sounds. If you know exactly what you're listening for, you can easily pinpoint which parts are malfunctioning and need to be either repaired or replaced. If you act quickly, you can still save your kitchen faucets from complete wear, and you'll be able to enjoy several more years of use from the faucet before having to replace them. This article will look at 3 of the most common causes behind noisy kitchen faucets, and how you can repair them.
Quieting Down a Screeching Faucet
If you hear a screeching sound every time that you turn on the kitchen faucet for water, there's a good chance that your faucet is an older model and contains rubber washers inside. The screeching sound is caused by the fact that the rubber washers have hardened and aged. This causes the faucets to make a particular sound whenever water passes through them.
Your best bet at solving this problem is to take the faucet apart and to look for the rubber washer. If the rubber washer has indeed hardened, then it's time to replace it with a new one. New rubber washers can be easily found at a local home hardware store. They're also relatively inexpensive. Just chuck the old rubber washers in the trash.
Stifling Clanking Noises Coming From the Inside the Faucet
Although it's not uncommon to hear clanking sounds coming from the plumbing, it's unusual if the clanking seems to be coming directly from the faucet itself. Put your ear to the faucet to get a good idea of whether you can pinpoint the exact origin of the noise. If you hear clanking sounds coming from the faucet, it means that there are either cracks and leaks in the hardware or that the inner parts and mechanisms have loosened. Either way, you're going to have to disassemble the entire faucet in order to get a better look.
If you notice cracks or leaks on certain parts, you can try to find replacement parts at your local home hardware store. However, there's a good chance that you're going to have to replace the entire faucet. On the other hand, if you can't find anything wrong with the parts, try tightening everything to see whether you can stifle the clanking noises.
Hushing a Squeaky Handle
Does the handle of the kitchen faucet start to squeak unbearably whenever you turn it on and off? This usually happens when the threads of the faucet stem starts to wear down. It just means that there's more friction between the moving parts. If you don't want the handle to wear down even more, disassemble the faucet and apply plumber's grease onto the threads of the faucet stem. This should lubricate the structure and hush the handles.
Be careful not to apply too much plumber's grease onto the surface of the threads. If you go overboard, the lubricant will leak into other parts of the kitchen faucet and may create a mess. After lubricating the threads, you should also find that the handles will be easier to turn.
If the kitchen faucets start to squeak and make noises, then there's a good chance that they are showing signs of wear. Try to figure out where the sounds are coming from as soon as possible, so that you can correct the situation and prevent the kitchen faucets from needing to be replaced soon. For more information, see a website such as http://www.abbeyplumbing.com/.